Well here are my goals and what im planning to get done:
Head blueprinting
Stg 2 crower (non turbo) cams, they should hold up fine with the turbo, right?
Adj. Cam gears
Port matching n polish
3 angle valve job
New 4g63 springs
New retainers
Crank scraper
Srt-4 oil and fuel pump
Undecided on injectors but most likely 2.4/srt-4 injectors.
Block blueprinting
And im now leaning towards the 9.0 CR. (need to research pistons)
Im pushing for at least 350 hp. But I wanna overbuild for about 450-500 hp in case I want to try something new.
I want the car to be reliable and just enough to beat some locals with their sr20's and b20 v's lol. and eventually in about a year ill boost the car. So there it is... Whats ur guys's opinion...