Go back to previous topic
Forum namePerformance/Engine
Topic subjectP0300
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=135542
135542, P0300
Posted by JoshDSM, Dec-31-69 06:00 PM
I am getting this code, now i know its a multi misfire and I have red what the causes could be. Now my car runs fine so i am thinking that its the coil pack?

Any help is needed......sorry if this is in the wrong place.
135543, RE: P0300
Posted by CODE4, Dec-31-69 06:00 PM
Check the suggestions here:

http://www.obd-codes.com/p0300
135584, RE: P0300
Posted by venge24, Dec-31-69 06:00 PM
this could also be a fuel problem, like injectors clogged with gunk or whatever, i had this problem, my filler tube was rotted onm the top and i didnt know it, so it kept putting crap in the tank and it was enough to get passed 2- filters i had in the system. i kept cleaning the injectors, and they kept clogging back up faster and faster, anyways, the morrell of the story,

take the injectors out, clean them with carb cleaner or TB cleaner, blow them out with air, ect, see if that works, its about an hours job for me since ive done it a dozen times or more
135585, RE: P0300
Posted by venge24, Dec-31-69 06:00 PM
it also showed me the codes for multi cylender misfire, and also 1,2,3,4, depending on witch ones wore the worst
135588, RE: P0300
Posted by JoshDSM, Dec-31-69 06:00 PM
Okay, I got my codes red with a better scanner than I have it red p0300-4. I hope its not bad gas because I got a full tank of 93 the day before. Also got a new coil pack, wires and plugs to see if it works.
I generated this page in 0.011076927185059 seconds, executing 7 queries.