Go back to previous topic
Forum namePerformance/Engine
Topic subjectRE: no start. cranks, no fuel or spark
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=131904&mesg_id=131905
131905, RE: no start. cranks, no fuel or spark
Posted by Star Turbo Talon, Dec-31-69 06:00 PM
Do you have 12v at the coil pack while cranking?

IF you dont that means the ASD is not actuating.

IF that is the case you need to check signal from the crank and cam sensor. 3 wire sensor has a ground, 9v power and a signal wire the ECU. Verify your power and ground first. If that checks out good you want to verify the signal wire continuity (wire end to end and end to ground)to the ECU to verify the wire isnt shorted or broken.

If the Coil is getting 12v while cranking then probe the ECU wires for a ground pulse.

Check to see if your getting injector pulse. Use a test light or a noid light.

post back your results.

I generated this page in 0.0097200870513916 seconds, executing 6 queries.