Go back to previous topic
Forum namePerformance/Engine
Topic subjectIs my O2 sensor voltage messed up?
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=110687
110687, Is my O2 sensor voltage messed up?
Posted by VX100, Dec-31-69 06:00 PM
I've installed the safc CORRECTLY now, I've got the blue wire mod hooked up to the white wire with the black stripe on the upper connector (this is the O2 sensor wire, right?) so I think it's wired up correctly

well, the O2 voltage just went to about 0.72V and stayed around there at idle, it only varied by about 0.05 V that's it. I didn't let the car idle very long. Did I just not wait long enough for the O2 sensor to warm up or is there something messed up?

Is the voltage supposed to get to about 0.96 V or so and THEN it starts fluctuating from about 0 to 1 v at idle?

Todd Scungio
98 RS
15.803 @ 86.48 MPH
110688, RE: Is my O2 sensor voltage messed up?
Posted by Armond30, Dec-31-69 06:00 PM
O2 sensor was still cold. once it warms up, it will bounce from rich to lean. Giving the car a few quick revs usu. speeds up the process.

have fun!
110689, thanks for the help armond
Posted by VX100, Dec-31-69 06:00 PM
Todd Scungio
98 RS
15.803 @ 86.48 MPH
I generated this page in 0.0081498622894287 seconds, executing 7 queries.