117344, RE: hey everyone!!! a quick question??? (data logger) (PS Michael email me at home!!! (ericr2@home.com) and let me know how it is going.
Posted by JasonESi_T, Dec-31-69 06:00 PM
Hi Eric,
>I have the OBDII data logger
>and was wondering if some
>one with one could find
>out what their TPS sensor
>is reading @ idle?
It appears not to go below 14.1 on the sensor reading, Eric. No higher than 75-76 or something either, i fI remember correctly. I sent my reuslts to Wyatt after he requested them.
>
>Second...my reset CEL button doesnt work.
> Do any of you
>have this prob?
Okay, I thought this too at first, BUT to do this you have to have th car in the ON position with the car off...meaning the engine NOT RUNNING. Then you go to the appropriate "Codes" screen and press the reset button. It won't work if you try and reset while the car is running. I explained this to Wyatt and I'm guessing that worked for him since after I told him , he hasn't asked about it again.
Can
>one of you test it
>for me? Do something
>like unplug the EGR solenoid
>or the TPS or Cam
>angle sensor and try to
>generate a CEL and see
>if the software will reset
>it.
>
Hmm, campare my numbers here and then ask me if you still want me to do this. I sent a lot of my numbers to Wyatt. He probably has a decent set of numbers from himself, me and maybe you (if you have been comparing notes with him). Try and get a hold of him and ask him. Make sure and post any noteable deviations or things to watch for. Thanks!
Hope this helps bud!
Jason
98' Eagle Talon ESi-T
Mitsu Super 16g Turbo(HRC)
http://springfielddsm.homestead.com/JasonsPics.html
|