Alright, I've searched and haven't came up with anything relevant. Can someone give me the sizes of the 4 bolts that hold the modular clutch onto the flexplate? Thanks in advance.

Highly recommend that you get those from the dealer.

They are a standard size but

they are grade 12+
and the head is extra wide and short for clearance issues and surface area.

Alright got ya, thanks again.

Or you can pick them up from a specialty bolt shop.

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=34&topic_id=62&mode=full

Ok, went to the dealer and they had a hard time looking, they were going to sell me some bolts for the automatic since they couldn't find anything for a manual so I held off so I wouldn't have purchased the wrong bolts, they also had a hard time believing that the modular clutch bolted onto the flexplate. Can someone give me the exact sizes so I can tell them? Here's picture of the bolts I'm talking about. Thanks again.

I think you should be able to reuse those bolts for the modular clutch. If not just ask for the bolts for an Eclipse or whatever.

Originally posted by freelancefool
I think you should be able to reuse those bolts for the modular clutch. If not just ask for the bolts for an Eclipse or whatever.

So you're saying I can just use the torque converter bolts? Thanks again freelance.

Originally posted by 420aSebring

Originally posted by freelancefool I think you should be able to reuse those bolts for the modular clutch. If not just ask for the bolts for an Eclipse or whatever.

So you're saying I can just use the torque converter bolts? Thanks again freelance.

Same part number.