Originally posted by 99MitsuEclipseGS
Ok so heres the deal guys I seriously need some help, I got the fans started up and the almost all of the air outta the PS lines but the trans still wont catch I have been talking with a couple guys over on Mitsu-Media and they think it could be a shift solenoid, but I can not find one for the life of me that wont take a couple days to get here and I need it like NOW!!! I have also been talking with my dad about it and he thinks it could be that when they replaced the passenger side frame rail they didnt get everything lined up correctly when they bolted up the trans again and its still not lined up right. Do you guys have any ideas besides the internals being FAWKED UP?

If thhat solenoid is a trans. shift sensor by a chance try autozone or advance.

Look at the side rail with dad and try to aligned yourself cheap than have a shop do it.

Raise in the front the cross member and use a second jack put a soft towel on the round part so you dont dent the trans pan.

If the trans, is hanging there to line it up again would be similar method when replace the top passenger motor mount, bolt it back up it could be loose or missing a bolt or two.

The trans, catch problem could be a few things
1. starter is missing some teeth:7 and its not catching the plate,
2. could be that Flexplate is missing some teeth as well, the torque convertor is shot. If this would be it also, I would replace both.

Try, southbend I think they A604 torque convertors or do a search on Yahoo.com type the word A604 torque convertor or a604 for sale and it will show tons a of sites for your tranny.

3. You could be very low on atf Fluid, walmart carries supertech ATF for 2-3 bucks a quart, similar to the Mopar they stopped carrying.


I have same type tranny and read threads of what others go thru. common problems. Fluid is the last thing everyone suspects.