3759, Please help ASAP.. I have pics!!!!!! Posted by DegreE, Dec-31-69 06:00 PM
Okay, i just recently dropped a 98 motor and tranny into a 95 Eclipse.
OBD2 --> OBD1
Everything is hooked up except for the following.
I goto start the car and I get nothing. not even a turn over.
The battery has plenty of juice.
Okay, Asfar as the motor goes, all the sensors have been swapped and are now hooked up to the 95 harness.
But I have a problem with the trany.
There is one rather large plug that does not come on the 95 harness.
Here it is: remember, (this is a 98 tranny)
Its the 2nd biggest plug on the tranny.
Here are the 2 plugs left overon the 95 harness:
what are my options?
i was thinking mabey i can get that plug from a OBD2 harness and rewire the 95 harness using that OBD2 plug.
But I'm not sire what sensors I'm fucking with.
can you tranny experts help me out please before I pull my hair out and burn the fucking car to the ground.
thank you
PS: Here are some pics and details from the swap:
http://www.southfloridaracing.com/forums/showthread.php?t=27633
-DegreE
|