| Go back to previous topic | | Forum name | Auto Trans- A604 | | Topic subject | RE: New free mod, torque reduction sensor switch | | Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=33&topic_id=2286&mesg_id=2305 |
2305, RE: New free mod, torque reduction sensor switch
Posted by mcgyvr, Dec-31-69 06:00 PM
you only loose passing gear when you are cruizin in 4th at 70+mph and try to slam on the gas it wont go back to 3rd for that passing gear <-- thats why wiring a switch is good.
all you do is just cut wire 63 (orange with black stripe)from the ecu and either just leave it and tape the cut wires up, or wire in a switch to it, so you can turn it on and off. I will do a write up if you want. This only works on automatics with the TCU seperate from the ECU. basicaly anyone with a pin 63 thats orange with a black stripe.
like this
Stock
TCMpin10--------------pin63ECU
Modified
TPMpin10------Switch-----pin63ECU
thats it
| |