Go back to previous topic |
Forum name | 2GNT Buy / Sell / Trade (BST) |
Topic subject | Your Need For my performance parts :) |
Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=16&topic_id=33231 |
33231, Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
here goes my setup after deciding to sell my dsm and move on to something new .. my loss is ur gain .. feel free to email me at pimpish80@hotmail.com or aim me at q8supra98 .
1- AEM cold air intake (Red)CA LEGAL 2- Greddy header with downpipe CA LEGAL 3- MSD wires 4- ractive res upper strut bar 5- optima red top only 3day old 6- Enkie rs-6 rims and tires 7- Tanbe racing medallion catback 3" exhaust CA LEGAL 8- 3 ultralite gauges . oil press/volt/airfuel 9- tan pillar brand new just prefited then taken off 10- phantom tachmeter 5"
make me an offer and we will shoot from there plus all the engine parts are cali legal ( carb sticker ) which means they pass smog andthey are legal.
Joe
|
33232, RE: Your Need For my performance parts :) Posted by AznKaos15, Dec-31-69 06:00 PM
what size are the rims? do you have pics? are they bent and how much are you looking to get for them?
|
33233, RE: Your Need For my performance parts :) Posted by silvereclipse30, Dec-31-69 06:00 PM
I want the headers and the strut bar??? what do u want for them???
|
33238, RE: Your Need For my performance parts :) Posted by Malenko, Dec-31-69 06:00 PM
is the tan pillar 2 or 3 pod? if its 3, how much for it and the VOLTT gauge?
|
33241, RE: Your Need For my performance parts :) Posted by insiderGS, Dec-31-69 06:00 PM
Second dibs on the volt gauge and how much for the Optima Red Top?
|
33242, RE: Your Need For my performance parts :) Posted by EclipseTenzoR, Dec-31-69 06:00 PM
Might be interested in the rims, if he backs out.. How much and any pictures?
|
33244, RE: Your Need For my performance parts :) Posted by TalonSpeed, Dec-31-69 06:00 PM
sent PM about intake
|
33258, RE: Your Need For my performance parts :) Posted by Eagle 5, Dec-31-69 06:00 PM
how much for the tanabe racing medallion? how long was it used? does it bolt up to stock and is it 3" all the way through? stainless steel?
|
33259, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
pms were answered ..
malenko .. its a 3 52mm pod pillar 100 shipped with voltage .. let me know
pm concerning header and strut bar was sent...
rims are 17" .. but trust me u need to re-powdercoat them :)
optima red as i said 3days old only used to start up the car .. and then i decided to sell my baby :( shoot me an offr on that if ur intrested ..
p.s the best way to get intouch with me is AIM im always on there .. just shoot me a line and we will work something out .
p.s pix of the car will be up soon
Joe
|
33260, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
its a stainless steel been onthe car for almost 8months now ... yes its a 3" catcback shoot me an offr
let me know
joe
|
33269, RE: Your Need For my performance parts :) Posted by Malenko, Dec-31-69 06:00 PM
I'll pass
|
33273, RE: Your Need For my performance parts :) Posted by bokchoi, Dec-31-69 06:00 PM
second dibs on Greddy headers and was wondering if I can just get the volt meter itself.
|
33277, RE: Your Need For my performance parts :) Posted by Eagle 5, Dec-31-69 06:00 PM
What did you originally pay for it? pm me or hit me up on AIM, im am quite interested if the price is right (now i sound like im on a game)
|
33279, RE: Your Need For my performance parts :) Posted by 2g99RSNC, Dec-31-69 06:00 PM
how much for the tach and do u have any pics
stage 4 clutch, aluminum flywheel, solid motor mounts, Phantom grip, phantom boost, egt, a/f, oil psi, apexi TT, Jeep TB, Star stage 2 with custom 3 inch downpipe out passenger side bumper, custom ground kit, falcon azenis, 2 inch drop, eibach camber kit, crank scrapper,AEM cam gear, short shifter, AFX UDP and some other stuff
|
33301, RE: Your Need For my performance parts :) Posted by WickedESi, Dec-31-69 06:00 PM
What do you want for the header?
|
33318, RE: Your Need For my performance parts :) Posted by silvereclipse30, Dec-31-69 06:00 PM
$500 is way too much for the headers...they better have superpowers
|
33329, RE: Your Need For my performance parts :) Posted by widebodied, Dec-31-69 06:00 PM
3 inch exhaust
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job
2000 Yamaha R-1, 165rwhp 117 ftlbs tq
ALMOST THERE...... MUWHAHAHAHAHAHA
|
33333, RE: Your Need For my performance parts :) Posted by nightwolf2369, Dec-31-69 06:00 PM
how much for the tan pillar itself and it is a triple?
|
33345, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
i said 500 for the greddy and sturt bar shipped to ur door .. u can always offr me ..
il get pix 2morow i promise .. the best way is to catch me on aim u guys .. i dont get notified when someone replies to this ad ..
and i will try to work with everyone for a great deal ..
the pillar is tan and its a lotek triple pod.
tach is for 90 shipped .
thanx
|
33346, RE: Your Need For my performance parts :) Posted by WickedESi, Dec-31-69 06:00 PM
Hmm, take it you can buy a brand new Greddy Header for ~$380 from www.adventon.com, I just can't take you up on that.
|
33347, RE: Your Need For my performance parts :) Posted by Eagle 5, Dec-31-69 06:00 PM
im interested in thee xhaust if you still have it. just wondering what you are looking for it shipped to my door? what is your aim name so we can try to get ahold on you there?
|
33372, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
MY AIM IS .... Q8supra98....
im there allll the time .... unless im in schoooool ...
THANk YOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOU
|
33458, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
update ...
volt and a/f gauges are sold ... emails have been sent with tracking numbers ..
Joe
|
33724, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
exhaust and battery are sale pending..
offrs offrs and nothing yet :)
AIM - q8supra98
joe
|
33725, RE: Your Need For my performance parts :) Posted by bokchoi, Dec-31-69 06:00 PM
Just got my volt meter gauge and looks good...get your stuff from this guy people you wont be disappointed! :)
|
33728, RE: Your Need For my performance parts :) Posted by AznKaos15, Dec-31-69 06:00 PM
Originally posted by AznKaos15 what size are the rims? do you have pics? are they bent and how much are you looking to get for them?
i'll pass. thanks
|
33787, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
phantom tachmeter 5" sold .. will shipp 2morow :) and thanx kev .. it was nice doing business with ya bro :)
Joe
|
33817, RE: Your Need For my performance parts :) Posted by silvereclipse30, Dec-31-69 06:00 PM
I'll give u 151.01 for the header u gotta pay shipping tho thats only fair.....I hate lowballers 2....tell me what u think about the offer.........THANKS
|
33845, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
haha ..
up this goes :)
|
33923, RE: Your Need For my performance parts :) Posted by VOTBLINDUB, Dec-31-69 06:00 PM
items 2, 3 and 8 still around?
|
33930, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
aim has been sent :P
joe
|
36201, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
here is whats left ...
AEM cold air intake (Red) CA LEGAL
Greddy header with downpipe CA LEGAL
ractive upper strut bar (RED) .
Tanabe racing medallion catback 3" exhaustw/ silencer CA LEGAL
Oil pressure gauge ultralite 52mm a.k.a 2 1/6
Pics are availble on request
Prefer pick up but will work with shipping some ..
AIM - q8supra98
Joe
|
36203, RE: Your Need For my performance parts :) Posted by nightwolf2369, Dec-31-69 06:00 PM
how much for the aem cai, and the greddy header. they have to be in very good condition tho
|
36206, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
Originally posted by nightwolf2369 how much for the aem cai, and the greddy header. they have to be in very good condition tho
Email sent ..
once again the best way to catch me is on AIM - Q8supra98
Joe
|
36621, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
added ... Front and Rear bumpers 97-99 style ..Teal/green in color .. those are only pick ups ... also a Grey center console with armrst and all goodies :)
so up this goes
|
36626, RE: Your Need For my performance parts :) Posted by eclipticrider, Dec-31-69 06:00 PM
how much for just the armrest portion shipped to 33624 tampa fl.
WTB: Dodge Omni
http://www.geocities.com/shadyporshe851proof/frame_content/indexframe.html
mods: star stage III clutch + 60mm tb + the normal mods, bass, lights well u get the picture
|
36641, RE: Your Need For my performance parts :) Posted by widebodied, Dec-31-69 06:00 PM
ill do 350 shipped on the exhaust
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job
2000 Yamaha R-1, 165rwhp 117 ftlbs tq
ALMOST THERE...... MUWHAHAHAHAHAHA
Originally posted by Thunderous_Talon a man could build a thousand bridges, and suck one cock. he'll forever be known as a cocksucker.
|
36660, RE: Your Need For my performance parts :) Posted by Strictlyimports, Dec-31-69 06:00 PM
sorry selling the whole centre console... im asking 45 shipped for the whole thing ..
the exhaust is pending sale sorry.
Joe
|