I am putting together a meet soon for us peeps in the yaye area at my friend's shop www.prostreetonline.com

we will have a swap meet, u guys can meet PSI, check out some crazy ass DSMs being worked on there, and of course have a BBQ.

If this date is cool let me know... i want a BIG turnout. Thanks all for supporting. :)

Who is down to go? Tentative date is in about a month or so...


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

yay it doesn't conflict with my drill. I'm in the RS will make it hehe. I put all my nice wheels on just for it hehe. BBQ free food??!! Krazy DSMz what else do you want! Do they have a big parking lot to do drifting in haha j/k :P Count me in :)

im down

ttt


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

I might be down to go, depends on when and where though. This would be in the east bay right? And are you thinking in a few weeks, or a month or so?

Dood you said BBQ, I'm so there. Plus I've been wanting to go and check that place out. Thats on Winton right?

a performance shop that is local? damn i didnt even know about this place. sounds like a perfect time for me to come check it out. ill be there.

Kory- make sure it's a Saturday!

yeah it will be a saturday!

the tentative date is 9-28th or the weekend after... it will be fun!!!


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

i'll go, but can't on the 28th, (sisters wedding)

Speedracer- bring the Tiburon so we can check it out! :thumbsup

lets do weekend after 9-28, i will be in humboldt

Ok so the Meet is on October 5th (SAT) at 2pm at PSI... who's down?

I hope my car is done then too


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

I'm probably down to go. Not sure what the situation with the turbo setup will be by then though. And where exactly is PSI?

I'll be there too. Hey Kory- Abe got laid off and moved to So Cal where he got another job. :( ( ...actually :) since he found another job)

I'm down to go on oct 5. Hopefully i be settle in on the new house by then.

too bad it's on a sat...I have to work then, if it was on a Sun., that'd be a different story
btw, where is this shop located, Kory?

this shop is in hayward


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

is psi going to have a sale that day kory?

hey...anybody going to the meet want to buy a stock 420A TB for $45 dollars? It works perfectly and comes with sensors.

One thing though is that there is a torx screw holding a metal bracket still attached to bottom of the TB. It has nothing to do with the TB or how it functions, I just couldn't unscrew it and didn't want to strip it the screw. I'm sure someone with better tools can remove it in a minute.

do is Oct 5th the final day? i'd like to go, i'm right across the bay in redwood city.

ken

i am down to go.
hopefully myu turbo will be in by then.
by the way guys i got an A on my Analitcal Chem test!!!
later
"Z"

too bad u didnt get an A in english class "analytical" hehe :P

redwood city isn't that far from hayward man! it's about 25-30mins tops


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

I just moved to into the Modesto area...thats close enough. I want to come check it out and meet some people. Although I work till 8 am sat morning...bah! who needs sleep!

welcome ultimar!


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

hope I can make it I might have drill. We're going over that shiet this weekend so I'll find out on saturday. Dang two meeks one weeekend after another hehe. There's gonna be some big ass meet at Logitechs parking lot on the 12th with like the celica guys and the club4ag guys. Hehe hopefully my smog problem will be solved by then or its the garage for the RS.

OK guys final specs of meet:

OK GUYS!!! The meet is ON like donkey kong!

Saturday Oct 12th at 1-2pm (ish) to 3-4pm (ish)
Address can be found on www.prostreetonline.com

The agenda:

- BBQ!!!
- Meet/swap/etc - we should really meet each other and put a face to
the names
- PSI will be RAFFLING away FREE:
- set up tockico illuminas for a 2g
- free turbo timer
- free gauges
- etc
- Afterwards we can cruise, go beach, watevers

I hope this date works out for you all. I am really trying to have a GREAT meet with DSMs (1/2gnts and 4g63s) at a local shop that supports DSMs. Hope you all can make it! Bring cameras and digicams. My car is a 2G Eclipse AWD. If anyone has any Qs email or reply here and I'll get back to you. Looking forward to seeing you guys there!




96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

yay!!! ill be there for sure

anyone want to cruise up from san jose?

hit me up on aim or email

aim:tackimac8
email:tackimac8@aol.com

>
>OK GUYS!!! The meet is ON like donkey kong!
>


LOL...Kory said Donkey Kong!!!

its looking like this is goign to be an awsome meet. i definately still want to go. currently my car is sitting in the driveway with its guts all over the garage. i am finally starting my turbo install, so i am glad the meet isnt until the 12th of october. if i could show up with a snail under my hood i would be one happy man. i want to show up reguardless but if my car is still not running (i dont want to let myself drive it until the turbo is installed or else it will never get done) would it be ok if i cruised up there in another friends non 2gnt ride?

Sweet!!!

I will see you guys there!!

Ok im hoping yall will show up at 1:30ish-2ish so i can have a chance to setup the bbq hehe... all is looking good so far!


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

I'm down for the meet too (just as long as I can win those shocks...j/p), found out tonite that I did in fact get my days off changed at work...back to Thurs. Fri. Sat. off for me!!! Damn 12 hour grave shifts (6:30 p.m. to 6:30 a.m.)

also mark down my girlfriend too...she's taking photo in school, and she thinks this would be a good opportunity to use up some of her film, so she can develop it!!!


P.S. Dan, go ahead and bring that TB, and I'll take it off your hands...do you happen to know what size the torx screw is?...I have a 10 and 15 in my room, so I may buy one before I get down there...gotta' stop at Sears, CRAFTSMAN BABY!!!

see u at the meet william!


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

William- ...I'm hoping for the shocks too since I have no use for the guages or timer heh heh....I'm not sure what size the Torx screw is....I have one of those cheepo Torx drivers sets that are all bundled up and don't seem to list the size. I'll try to find out and I'll email u. Glad you can make it! :)

Unless something comes up I'll be there, I really need those shocks, my suspension is driving me nuts :).

guys looks like a good turnout as it is a lot of dsmers from dsmtuners will show up as well. see yall there


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

Sounds like alot of peeps gonna show up. Hope there is enuff food.

And you guys can forget about winning my struts, lol!!!!

yeah ur ass better show up this time graspher!!!


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

hey William- Sorry, i don't know what size the screw is. (it's the like the 4th smallest one on my little bundled Torx screw tool thing)

you can actually just leave it on- the TB will still work fine and It'll still install correctly. If you send it to ARD for boring, they'll take it off for you.

thanx for letting me know, I'll bring the 2 that I have just in case...I can't wait...it'll be sooo much fun!!!

The torx screw is #15 99% positive. see yall there.

Hmm ok now there are 2 meets on the same day. I was gonna go to this club4ag meet with the MR2 but now I guess I'll bring the eclipse to the club4ag meet for like a minute to see wassup then head on over the PSI. I'll be going with my friend in his 2G GST see y'all there! ^_^

Is Flossinpinoy going? I want dem foglights dude if you go bring em. Bumper is still jacked up but I might as well get the lights now. :)

NE1 selling a front strut bar? A CHEAP one?

whose planin on going down from the sacramento area? Looks like I will be attending the meet. anyone wanna meet up? or anyone in between stockton and hayward? just lookin for some peeps to cruise with. hit me up on AIM or e-mail.

looks like a good turnout! hope to see yall there... ill be there around 12 to setup etc... drive safe everyone's who's coming from far.


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

>whose planin on going down from the sacramento area? Looks
>like I will be attending the meet. anyone wanna meet up?

Hey Basik...I'm goin'...I was at the NorCal meet over the summer...the one where we took the pix at Fry's...I live near Vacaville, if ya wanna' meet somewhere (say the In-N-Out in Vacaville, right off I-80, or somewhere else) just let me know...

I'll be meeting up at 1130 at the Great Mall supposedly in front of the theatre with with some other DSMers. Gonna head on over to another meet at logitech and take buncha pix then head on over to PSI see y'all there =) So if ne1 wants to hit up 1 meet in a convoy and go to the PSI one 1130 is the plan.

Just in case your wondering what the other meet is it's support to be a meet between hella groups like club4ag, PDC, etc.... So there's bound to be some cool stuff there and they gots food too but I'll probably get some grub at PSI instead.

bout time we made another meet..

yes we were all waiting for u to return allan :)


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

damn it!!!...I may not be there for the whole meet...me and my girl got into a big fight the other day and she pretty much broke up with me :'( (1 year 2 months...longest relationship for me so far...), but she wants to talk to me on Sat. (like in the early afternoon) I may only be there for like an hour or so, so I will be there to pick up that TB...so don't fret, and hopefully we'll be able to either stay together...or stay friends, so I can bring her to the next meet!!!

EDIT: I'll try to be there around 12:45 p.m., what time are you gonna' be there Danny?

William- I'll be there at that time. No problems man.

Hope everything works out for you and your GF.

I'll see if i can get off my lasy @ss and head down, Mark are u going down I just found your number i'll give u a ring thursday? Jeff u wannt hook up I'm working in sac that morning but getting off like 10 unless i can in sick so hit me up. anyone on the side of bay bridge wanna hook up, i.e vallejo, fairfield, concord, sac, richmond, etc. email me i'll send u my cell incase i don't work and i over sleep.

Let me know,

Jay

ps my car is in ass shape, so bad i don't wanna drive it.
so don't laugh if u see it :(

damn it all...we got back together...so don't worry...and all you peeps going through Vacaville...(707) 365-3222 is my cell, I'll be at the In-N-Out in Vacaville, 'til about 11 a.m., if ya wanna' roll...

Anyone coming from sac/stockton area. I'm in manteca.

yo randy still got dem fog lights for the MR2?

<yo randy still got dem fog lights for the MR2>. I still have them. i'll bring them to the meet. sorry no bulbs on them, used it on the X.

Just wondering which car ru bringing?

ok guys, the meet is on! only 2 more days... the meet looks like a BIG turnout! there are 20some cars already coming from dsmtuners... hopefully see u all there... look for my car :)


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

I'm bringing the X. Hopefully somebody out thier have a datalogger and help me logg it.

i got some GVR4 guys going also so good meat!


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, afx pulley, B&M SS, magecores & NGKs, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 15 degrees Frank 2 w/46trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, AEM big brake upgrade w/MM pads, MOMO Race steering wheel, Ground Controls Coilovers, Koni Yellows, Ingalls Camber Kit, F&R STBs and free mods. To all the haters _|_ tia

Hey guys! just got back, great meet, got to meet lots more ppl and show off my tibby :) To bad kory was late :P lol

Yeah to bad the Tibby is a Hyundai, and nobody wants to see it, especially not in a movie :P

Well I had fun, but I think I had one of the slowest cars there, well maybe faster than the 1.8 liter a/t 1g that was there :). To bad I got there late and missed the free stuff and food. Can't wait for the next meet, if I even have my 2gnt at that time.

yeah jeff, my cousin and i got there kinda late missed all the food. well it was cool i think jeff and i wished our cars were in better shape well his is better then mine. But $hit happens what can i tell ya.


Jay

by the way in case one noticed i posted pics in general section