Go back to previous topic
Forum nameReal Racing
Topic subjectRE: 1/4 time for 11psi
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=11&topic_id=4793&mesg_id=4835
4835, RE: 1/4 time for 11psi
Posted by MetalJim, Dec-31-69 06:00 PM
You're running a 1:1 regulator? What is your static fuel pressure? You should search the turbo section about problems people have had leaning too much with thier AFCs. Leaning the MAP signal causes our ECUs to advance the timing and people have blown their shit up because of it. You may want to look into getting something like a SFMU to control the fuel pressure curve with a bit less dependance on the AFC. Just a thought.

Theres no mention of upgraded pistons/rods. 11 pounds on that turbo is going to be bad news to your ringlands if you don't tune it right.

If you can manage to "fine-tune" it well enough then you should be able to get into the 14s easily with 11 pounds. High 13s are going to depend alot more on the launch and temperature - I think it may be doable but you might have to crank up the boost a bit to get there. Its a nice big turbo and a nice big FMIC.


95 Eclipse RS : 5 speed
14.76 @ 94.72mph
Jeep TB writeup - http://www.dimensia.com:81/jimbo/JeepTBfor2gnt.html
I generated this page in 0.0086178779602051 seconds, executing 6 queries.